IBUTTON ACCESSORIES 

A complete line of iButton accessories are available: Cables: Available in a variety of lengths and styles    Key Fobs: Available in a variety of colors and styles Mounting Hardware: For a wide variety of applications Tags: Available in a variety of colors and lengths
Embedded Data Systems provides an extensive line of products that simplify the task of working with Dallas (Maxim) 1-Wire and iButton related technologies. Ranging from Host Adapters to Sensors to iButton loggers, we offer OEMs and integrators one of the most complete lines of 1-Wire and iButton products in the world. Our products are designed for ease of use and low cost, which will simplify your product development while reducing both your engineering costs and your time to market.
DS9092 - Probe	DS9092 - Probe Check Latest Price The DS9092 iButton probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton's MicroCan package. Metal contacts resist wear a ...
DS9092R - Port	DS9092R - Port Check Latest Price The DS9092R iButton port provides the electrical contact necessary for mating remotely located iButtons or other 1-Wire MicroLAN devices with reader/writers. The iButton port is available without  a groove. The DS9092R works well for both applications where only a touch contact is needed, a ...
DS9106L - iButton Halo, Long	DS9106L - iButton Halo, Long Check Latest Price The DS9106 iButton halos are 0.25mm, thin vinyl highlighters that slide over an iButton that is to be labeled with text, picture, or numeric information. The halo is retained by a friction fit to the iButton it is pressed onto and one or two DS9096P double-sided adhesive pads.The halo itself is b ...
DS9093RA - iButton Plastic Card Mount	DS9093RA - iButton Plastic Card Mount Check Latest Price The DS9093RA Lock Ring is a stainless-steel fastener that provides an inexpensive method for firmly attaching an iButton to any item with a pre-punched hole. The iButton is inserted through the hole and is restrained by the flange on the iButton. The DS9093RA Lock Ring is crimped onto the portion ...
DS9092GT - Tactile feedback with grip-mount	DS9092GT - Tactile feedback with grip-mount Check Latest Price The DS9092GT iButton probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton's MicroCan package. Metal contacts resist wear and ...
DS9092T - iButton Probe with Tactile Feedback	DS9092T - iButton Probe with Tactile Feedback Check Latest Price The DS9092T iButton probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton's MicroCan package. Metal contacts resist wear and ...
DS9093S - iButton Wall Mount, 2-holes, 5 Pack	DS9093S - iButton Wall Mount, 2-holes, 5 Pack Check Latest Price The DS9093S allows the user to permanently attach an iButton to an object with one screw or rivet. The plastic plate is designed with an inset that accommodates the flange of the F5 package and allows for flush mounting. A protective wall is provided along the sides of the plate to reduce inciden ...
DS9096P - iButton Adhesive Pads	DS9096P - iButton Adhesive Pads Check Latest Price The DS9096P is a made of white, double-coated acrylic VHB foam tape (3M part number 4932) that is die-cut to match the diameter of iButton devices. The pads allow iButtons to be attached to virtually any smooth surface. The DS9096P offers an excellent long-term holding power for use in many inter ...
DS9106S - iButton Halo, Short	DS9106S - iButton Halo, Short Check Latest Price The DS9106 iButton halos are 0.25mm, thin vinyl highlighters that slide over an iButton that is to be labeled with text, picture, or numeric information. The halo is retained by a friction fit to the iButton it is pressed onto and one or two DS9096P double-sided adhesive pads.The halo itself is b ...
DS9093A - iButton Key Ring Mount, Angled Snap-In Fob	DS9093A - iButton Key Ring Mount, Angled Snap-In Fob Check Latest Price The DS9093A is very similar to the DS9093N. It is about the same size as the DS9093N and can be used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into the cavity of the fob. The DS9093A is available in black, blue, green, red, and yellow. Key Feat ...
DS9093F - iButton Key Ring Mount, Snap-In Fob	DS9093F - iButton Key Ring Mount, Snap-In Fob Check Latest Price The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or adhesives to this fob. This might affect the mechanical strength and reliability.Key Featu ...
DS9093N - iButton Key Ring Mount, Angled Fob	DS9093N - iButton Key Ring Mount, Angled Fob Check Latest Price The DS9093N angled fob is an alternate way to mount an iButton for applications that require only momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5 MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton ...
DS9098P - iButton Retainer, PCB Mount	DS9098P - iButton Retainer, PCB Mount Check Latest Price The DS9098P iButton Retainer is a low-cost, surface-mount device to secure an F5 iButton on a printed circuit board. It consists of three metal pieces (two for ground, one for data) molded into a body of black, heat-stabilized, 30% glass fiber reinforced Nylon 46.When inserting an iButton into th ...
DS9101 - Multipurpose Clip	DS9101 - Multipurpose Clip Check Latest Price The DS9101 multipurpose clip offers the user a low-cost fixture that mounts an iButton to a plastic badge or, using an additional wire or tie wrap, any object that provides a hole for strap-mounting. In contrast to the DS9093P/S, the DS9101 also allows mounting iButtons to bags or other soft-sur ...
DS9093RB - iButton Plastic Card Mount	DS9093RB - iButton Plastic Card Mount Check Latest Price The DS9093RB Flange Enlargement is a thin, stainless-steel washer that provides additional surface area to improve retention of the iButton in materials that are very thin or flexible. The DS9093RB is formed with a slight dome to improve the gripping force exerted onto the pre-punched material. T ...
DS1404 - Touch and Hold Probe Cable Cradle	DS1404 - Touch and Hold Probe Cable Cradle Check Latest Price With handheld equipment functioning as an iButton reader / writer one often faces the problem of finding a place for the probe when it is not used. The DS1404 Touch and Hold Probe Cable Cradle solves this problem. In addition, it converts the handheld equipment into a compact single-unit reader / ...
DS1402D-DR8 - Blue Dot Receptor iButton Reader Cable, Serial or USB	DS1402D-DR8 - Blue Dot Receptor iButton Reader Cable, Serial or USB Check Latest Price The DS1402D-DR8 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any serial or USB 1-Wire port adapter that has a RJ11 jack with up to two iButtons simultaneously. The DS1402D-DR8 Blue Dot receptor cable can touch any iButton for reading, but can only retain the F5 ...
DS1402-RP8 - iButton Probe Cable Reader, Serial or USB, 8ft Length	DS1402-RP8 - iButton Probe Cable Reader, Serial or USB, 8ft Length Check Latest Price The DS1402-RP8 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any serial or USB 1-Wire port adapter with a RJ11 jack to an iButton. The DS1402-RP8 probe cable can touch any iButton for reading, but can only retain the F5 version iButtons. Key Features Coiled ca ...
DS1402-RP3 - iButton Probe Cable Reader, Serial or USB, 3ft Length	DS1402-RP3 - iButton Probe Cable Reader, Serial or USB, 3ft Length Check Latest Price The DS1402-RP3 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any serial or USB 1-Wire port adapter with a RJ11 jack to an iButton. The DS1402-RP3 probe cable can touch any iButton for reading, but can only retain the F5 version iButtons. Key Features Coiled c ...
DS1402-BP8 - iButton Probe Cable Reader, Parallel, 8ft Length	DS1402-BP8 - iButton Probe Cable Reader, Parallel, 8ft Length Check Latest Price The DS1402-BP8 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any iButton socket to a Touch-and-Hold Probe. The Touch-and-Hold Probe can touch any iButton for reading, but can only retain the F5 version iButtons. Key Features Coiled cable for connecting iButton ...
DS1402-BP3 - iButton Probe Cable Reader, Parallel, 3ft Length	DS1402-BP3 - iButton Probe Cable Reader, Parallel, 3ft Length Check Latest Price The DS1402-BP3 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any iButton socket to a Touch-and-Hold Probe. The Touch-and-Hold Probe can touch any iButton for reading, but can only retain the F5 version iButtons. Key Features Coiled cable for connecting iButton ...
DS1402D-DB8 - Blue Dot Receptor iButton Reader Cable, Parallel	DS1402D-DB8 - Blue Dot Receptor iButton Reader Cable, Parallel Check Latest Price The DS1402D-DB8 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any parallel port 1-Wire adapter that has a RJ11 jack with up to two iButtons simultaneously. The DS1402D-DB8 Blue Dot receptor cable can touch any iButton for reading, but can only retain the F5 vers ...
DS1402-BR8 - MicroLAN Cable	DS1402-BR8 - MicroLAN Cable Check Latest Price The DS1402-BR8 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any serial or USB 1-Wire port adapter with a RJ11 jack to the DS1401 iButton Holder. Key Features Coiled cable for connecting the DS1401 iButton Holder to 1-Wire networks (8 ft when fully extended). ...