Embedded Data Systems is pleased to offer an easy to use solution for remotely monitoring the temperature of your IT or other operating infrastructure.  By offering out of the box compatibility with Dartware, LLC's InterMapper Network Monitoring & Alerting Software, our hardware will feed live data representing the temperature of your server rooms, racks, individual servers, HVAC ducts, etc. to your new or existing installation of InterMapper.  InterMapper can then proactively notify you when the temperature goes above or below pre-defined thresholds, potentially allowing you to take corrective measures before encountering costly downtime.  Additionally, InterMapper can produce graphs of all the historical temperature data it has collected, allowing you to spot potential problems before they happen. All communications with our hardware occur using HTTP over TCP/IP (standard networking protocols), allowing you to collect temperature data without complicated proprietary sensor wiring, and without occupying serial ports on servers, etc.  This means you can simultaneously monitor multiple, dispersed locations using your existing LANs, WANS, VPNs, or the Internet for connectivity to the sensors. The installation of each location consists of one HA7Net, and one or more temperature sensors (up to three per HA7Net*).  You simply connect the HA7Net to the Ethernet, and use a standard web browser to configure it.  Configurable options include IP address, DHCP, user-level security, SSL data encryption, and more.  After configuring the HA7Net, you plug the sensors right into the front of it.  You then describe each of the temperature sensors to InterMapper, and you are done. * Please note that while a single HA7Net can support up to 100 sensors simultaneously, people looking for ease of deployment will want to limit themselves to 3 sensors per HA7Net, as that is the number of ports available for direct connection of sensors.  Additional sensors may be used, but will require you to do some wire splicing. Typical Deployment InterMapper Probe File For each type of device it monitors, InterMapper requires a probe file which instructs it on how to interact with the device.   By using the link below, you can freely download a probe file that enables InterMapper to communicate with our HA7Net and temperature sensors.  This probe file supports monitoring temperature (either Celsius or Fahrenheit) using any DS18S20 based temperature sensor combined with our HA7Net Ethernet 1-Wire host adapter.  Installing the custom probe is as simple as copying it into the 'InterMapper Settings:Probes' folder and then telling InterMapper to reload probes.  For absolute convenience and no guess work, you'll find a list of sensor kits below that are guaranteed to work with InterMapper right out of the box.  For more flexibility, feel free to build your own kit by selecting the individual sensors below. InterMapper is a registered trademark of Dartware, LLC. The custom InterMapper probe file can be downloaded here. The following is a list of sensors and kits that are compatible with InterMapper:
Embedded Data Systems provides an extensive line of products that simplify the task of working with Dallas (Maxim) 1-Wire and iButton related technologies. Ranging from Host Adapters to Sensors to iButton loggers, we offer OEMs and integrators one of the most complete lines of 1-Wire and iButton products in the world. Our products are designed for ease of use and low cost, which will simplify your product development while reducing both your engineering costs and your time to market.
HA7Net - Ethernet 1-Wire Host Adapter	HA7Net - Ethernet 1-Wire Host Adapter Check Latest Price The HA7Net is a low-cost Ethernet to 1-Wire interface designed to simplify the process of integrating distributed 1-Wire / iButton networks into your application or system.  The HA7Net allows end users to enjoy easy remote access to their 1-Wire sensors and devices.  Likewise, integrato ...
P0329 - HA7Net Wall Transformer - US / Canada	P0329 - HA7Net Wall Transformer - US / Canada Check Latest Price This AC to DC wall transformer is for use with our HA7Net within the US and Canada.Specifications Input voltage: 120VAC@60Hz Output voltage: 9VDC Output current: 250mA Output plug: 2.5mmID x 5.5mmOD female right angle center positive (regulated) Dimensions: 2.47"H x 2.02"W x 1. ...
General Purpose Temperature Probe w/ DS18S20 and RJ11 Plug	General Purpose Temperature Probe w/ DS18S20 and RJ11 Plug Check Latest Price The STPSR3-12 temperature probe is designed for general-purpose, wide temperature range applications. It is constructed of 304 Stainless Steel, making it both durable and water resistant to 60 PSI. The probe has good chemical resistance properties to acids, alkalis, ketones, esters, aliphatics, a ...
Wall Mount Temperature Sensor w/ DS18S20 and RJ11 plug	Wall Mount Temperature Sensor w/ DS18S20 and RJ11 plug Check Latest Price The T2001S-R temperature sensor is designed for general-purpose ambient temperature measurement applications. It is constructed of high impact ABS plastic, ivory in color, and suited for wall or surface mounting. The T2001 is vented for good thermal contact with the ambient air. The back half of ...
High Temperature Stainless Foil 1-Wire Temperature Sensor w/ DS18S20 and RJ11 Plug	High Temperature Stainless Foil 1-Wire Temperature Sensor w/ DS18S20 and RJ11 Plug Check Latest Price The STFSR-12 temperature sensors is designed for general-purpose temperature measurement applications in the temperature range of -55 to 125 Deg. C.. It is constructed of 8-18 Stainless Steel Foil for durability and is adhesive backed for easy attachment to flat surfaces or pipes. The STF has goo ...
HA7Net Starter Kit for InterMapper, Single Sensor, US/Canada	HA7Net Starter Kit for InterMapper, Single Sensor, US/Canada Check Latest Price This starter kit contains everything you need to get started monitoring the temperature of a single room using InterMapper.  Additional sensors can be added later.  Please note that this kit does not include InterMapper itself, which may be obtained directly from http://InterMapper.com ...
HA7Net Starter Kit for InterMapper, Single Sensor, International	HA7Net Starter Kit for InterMapper, Single Sensor, International Check Latest Price This starter kit contains everything you need to get started monitoring the temperature of a single room using InterMapper.  Additional sensors can be added later.  Please note that this kit is packaged for international customers..you will have to supply a 9 Volt DC power supply for th ...
HA7Net Starter Kit for InterMapper, Three Sensors, US/Canada	HA7Net Starter Kit for InterMapper, Three Sensors, US/Canada Check Latest Price This starter kit contains everything you need to get started monitoring up to three temperature points in a single room using InterMapper.  Please note that this kit does not include InterMapper itself, which may be obtained directly from http://InterMapper.com . Kit contents:   ...
HA7Net Starter Kit for InterMapper, Three Sensors, International	HA7Net Starter Kit for InterMapper, Three Sensors, International Check Latest Price This starter kit contains everything you need to get started monitoring up to three temperature points in a single room using InterMapper.  Please note that this kit is packaged for international customers..you will have to supply a 9 Volt DC power supply for the HA7Net. Also note that this ...