HIGH TEMPERATURE STAINLESS FOIL 1-WIRE TEMPERATURE SENSOR W/ DS18S20 AND RJ11 PLUG 

High Temperature Stainless Foil 1-Wire Temperature Sensor w/ DS18S20 and RJ11 Plug

Product Code: STFSR-12 Price: Check Latest The STFSR-12 temperature sensors is designed for general-purpose temperature measurement applications in the temperature range of -55 to 125 Deg. C.. It is constructed of 8-18 Stainless Steel Foil for durability and is adhesive backed for easy attachment to flat surfaces or pipes. The STF has good chemical resistance properties to acids, alkalies, ketones, esters, allphatics, aromatics, and outdoor exposure. Our STFSR-12 temperature sensor is equipped with a DS18S20 1-Wire temperature sensor embedded into the foil tape. The sensor is manufactured using a special process that insures the internal sensor is thermally coupled to the stainless steel foil; this helps insure rapid sensor response to changing conditions. The STPSR-12 comes equipped with an RJ11 plug installed on the cable end. We have already taken the extra steps necessary during the plug installation to properly configure the sensor for parasitically powered operation. It is compatible with most 1-Wire bus masters right out of the box.   Features 8-18 Stainless Steel adhesive backed foil tape 2" X 2". 1-12 feet CAT 5 cable options. Optional Teflon insulated cable . Optional RJ-11 plug. No External Power required. Can be powered for fast (non-parasite) operation. 1-Wire communication protocol. Chemical and water resistant. Built-in multidrop controller (DS18S20). Automatic unique device addressing. Applications Include thermostatic controls, industrial systems, consumer products, thermometers, or any thermally sensitive system. Specifications Temperature Range (CAT-5): -30 - 225 Degrees F Temperature Range (Teflon): -67 - 257 Degrees F Accuracy (-10 to +85 Deg. C): -0.9 - +0.9 Degrees F Accuracy (-55 to +122 Deg. C): -3.6 - +3.6 Degrees F Resolution: 9 or 12 Bits (Specify when ordering) Supply Voltage: 3.0 - 5.5 Volts Active Current: 1000 - 1500 MicroAmp Standby Current: 100 -150 NanoAmp Input Logic High: 2.2 - 5.5 Volts Input Logic Low: -0.3 - +0.8 Volts Dimensions: 2 X 2 In. 1-Wire is a registered trademark of Dallas Semiconductor Corporation.