Z2TEN - 1-WIRE 0-10 VOLT ANALOG OUTPUT WITH ANALOG FEEDBACK 

Z2TEN - 1-Wire 0-10 Volt Analog Output With Analog Feedback

Product Code: Z2TEN Price: Check Latest The Z2TEN is a 0-10 Volt analog output generator with a built in interface for multidrop with other 1-Wire devices in a CAT-5 twisted pair network of up to 2000 feet and as many as 200 devices. The Z2TEN has a built-in multidrop controller (DS2406) which provides a unique 64 bit registration number (8-bit family code + 48 bit serial number + 8 bit CRC) assuring error-free selection and absolute identity; no two parts are alike. Unique addressing allows I/O function to be identified absolutely. The Z2TEN provides a 12-bit resolution 0-10 Volt analog output from digital commands received on a 1-Wire bus. A 12-bit A-to-D provides feedback directly from the generated output. This provides a closed loop for ensuring that the desired control output is being generated. The Z2TEN is designed to operate in a network of EDS 1-Wire digital and analog modules. Only two network connections are required: common(“C”) and data signal(“S”). The Z2TEN requires 12-16V DC power at very low current. The Z2TEN is enclosed in an ABS enclosure 2” X 2.5” X 1”. All connections are made with Phoenix screw connectors. The Z2TEN can be connected in a 1-Wire network for continuous polling (with OneSix). The Z2TEN requires a 1-Wire host interface or adapter such as the EDS HA3, HA4, HA5, HA7S, HA3T, HA7T, or Dallas Semiconductor DS9097U, DS9097E. Connector Description + Supply Voltage C Power and Signal Ground S 1-Wire Signal G Analog Output Ground A Analog Output Features Single 0-10 Volt Analog output. 12-bit Analog feedback from control output. 1-Wire communication protocol. Unique 64 bit registration number. CAT-5 twisted pair up to 2000 Feet, 200 devices. Very Low power requirements. Built-in multidrop controller, (DS2406). All data transfers are CRC16 error checked. 12 Volt DC operation. 2” X 2.5” X 1” ABS Enclosure. Phoenix screw connectors. OneSix compatible. Specifications Supply Voltage: 11 - 16 Volts Supply Current: 4 - 6 mA 1-Wire Load: 3 - 7 MicroAmp Analog Output Voltage: 0 - 9.99 Volts Analog Output Impedance: 2K Ohm Analog-Feedback Resolution: 12 Bits Operating Ambient Temperature Range: -20 - 70 Deg. C 1-Wire is a registered trademark of Dallas Semiconductor Corporation.  Phoenix is a trademark of Phoenix Contact.